There’s Something In Your House Right Now That’s Been Bugging You.
A switch that doesn’t make sense. An outlet that’s loose. A light that flickers when it’s windy. We’ve got a licensed electrician 10 minutes away and not a call center.
Your Licensed Electricians Since 1960
Kevin started this company in 1960. His family still runs it. When you call Broadview, you’re talking to someone who’s been taking care of Cleveland homes for over six decades and not a national chain pretending to be local.
Licensed, Dedicated Electrical Team
We have electricians who focus specifically on electrical work and not techs wearing three hats.
Flat-Rate Pricing Up Front
You know the cost before we start and labor and materials included, regardless of how long the job takes.
Older Homes, No Problem
Cleveland has a lot of historic houses. We know them and from knob-and-tube to Federal Pacific panels and everything in between.
All Work To Current Code
Every job completed to current electrical codes and safety standards. We don’t cut corners because your family lives there.
Comfort Club Priority Scheduling
Members get priority scheduling for electrical issues and especially useful when something goes wrong at the worst time.
11-Point System Inspection
We check the whole picture and not just what broke and so you’re not calling us back for something we could’ve caught.
Electrical Services For Cleveland Homes
From a loose outlet to a whole-house rewire and we handle it all. Here are some of the most common things we’re called out for.
MOST COMMON
Switch & Outlet Repairs
Loose outlets, switches in the wrong place, fixtures that don’t work right. These small things matter and and they’re quick fixes when you have the right team.
OLDER HOMES
Whole-House Rewiring
If your home has knob-and-tube or outdated wiring from the 1970s, we handle full rewires safely and up to current code. Cleveland has more of these homes than you’d think.
UPGRADES
Panel Upgrades
Adding appliances, an EV charger, or a home addition? We assess your panel and upgrade it to handle today’s electrical demands. Federal Pacific panels should be replaced for safety.
GROWING FAST
EV charger installation
We’ll assess whether your current panel can support a charger, recommend the right setup, and handle the full installation.
NEW BUILDS
Garages, Sheds & Additions
Built a new garage or outbuilding and need to give it power? We run the circuits, install outlets, and make sure everything is done right.
COMMERCIAL
Light commercial
We also handle light commercial electrical work. If you own a small business in the Cleveland area, give us a call.
A Lot Of Cleveland Homes Still Have Wiring From The 1960s And 70s.
That’s 50-year-old wiring. Codes have changed. Materials have changed. And the way we wire things now is significantly safer.
What is knob-and-tube wiring?
Knob-and-tube is an older wiring style where individual wires run exposed through your floor space and unprotected and uninsulated. It was standard in homes built before the 1950s, and we still find it regularly in Cleveland and its surrounding areas. If your home has it, it’s not necessarily dangerous today, but it’s worth having assessed. A whole-house rewire removes the risk and brings your home fully up to current electrical standards.
You'll know the cost before we start.
Electrical can range from a small repair to a full rewire and so pricing varies. What doesn’t vary is our commitment to telling you the number upfront. No hourly surprises.
SMALL REPAIRS
$50 to $500
Outlet and switch fixes, single circuit repairs, light fixture installs, and minor troubleshooting.
MOST COMMON JOBS
$500 to $3,000
Panel upgrades, EV charger installs, garage power additions, and partial rewires for specific areas of the home.
WHOLE-HOUSE
Custom Quote
Full knob-and-tube or outdated wiring replacement, whole-house rewires. We’ll assess and give you a detailed flat-rate quote.
* Pricing figures are general ranges. All jobs quoted flat-rate on-site before any work begins. Financing options available.
TRUSTED BY THOUSANDS OF CLEVELAND HOMEOWNER
4.9 Stars Across 1,400+ Google Reviews
Frequently Asked Questions
Modern homes typically need at least 150-amp service to handle today’s demands. Smaller homes may be fine with 100-amp, but if you’re adding major appliances, an EV charger, or breakers are tripping frequently, you may need an upgrade. Older panels like Federal Pacific (red handles) should be replaced due to safety recalls.
Everything from outlet installation, switch replacement, light fixture installation, outdoor lighting, panel upgrades, EV charger installation, whole-house rewiring, generator installation, and commercial electrical work. Note: they don’t sell fixtures or EV chargers, but will install what the customer purchases.
Hot outlets or switches, loose outlets where plugs fall out, two-prong outlets needing updating, burning or electrical odors, kitchen/bathroom outlets needing GFCI protection, panels making unusual noises, or any concerns in older homes (especially knob and tube wiring).
Depends on current service and existing appliances. EV chargers typically need a 60-amp circuit. If you have 100-amp service and multiple high-draw appliances (hot tub, welder, generator), you might need an upgrade. They’ll assess your situation and make a recommendation.
Make Your Home The Most
Comfortable Home On The Block.
Flat-rate pricing. Licensed electricians. Serving Cleveland since 1960.